Oppo A6 Pro 5G [CPH2781] ISP EDL UFS Testpoint Pinout Way

  Inquiry For More Information About Oppo A6 Pro 5G Official Specification

File Name	File Details
Name	Oppo A6 Pro 5G
Version	Latest Version
File Type	HD QUALITY IMAGE
Post Date	05 November 2025
File Price	Free File
File Password	WWW.GSMSAIHAAN.COM
File Hosted By	GSM-SAIHAAN
Compress	ZIP/WINRAR
Driver Need	Latest Update Driver
Download From	Google Drive/Mega/Mediafire

Feature OF Oppo A6 Pro 5G

Oppo A6 Pro 5G EDL Test Point is a hardware-specific ISP pinout or Test point used to enter the device into the EDL mode (9008) for flashing firmware/unlocking, or repairing. if your Oppo A6 Pro 5G phone is bricked, forget pattern lock, or you are not able to unlock FRP, then Oppo A6 Pro 5G Test Point can help you fix it quickly.

The Oppo A6 Pro 5G is a Most popular Android Phone known for its reliability and Super performance. However, if you find yourself locked out of your Smart-Phone due to FRP [Factory Reset Protection] and are Find for a solution, we are here to guide you through the process. In this Web post, we will explore using the Unlock Tool to perform a FRP Reset on the Oppo A6 Pro 5G So, let’s dive right in

This used to be called Qualcomm EDL Download mode on the Oppo A6 Pro 5G You can use this test point in any box, such as Unlock Tool/UFI/UMT/Chimera. It’s as simple as shorting the gold point to the ground and connecting the USB cable. Some people still use it because it’s an advanced way to get around the bootloader needing to be unlocked.

Boot into EDL Mode Details

• First OF All Download & extract Qualcomm USB Driver on your Computer
• Then Install the Qualcomm USB driver on your computer
• After Power Off your Qualcomm Android device
• Remove the back cover of Your phone
• Now check out the following image
• Find the EDL/ISP/UFS Test Point on your phone’s circuit board

Remove Oppo A6 Pro 5G FRP Using Any Unlock Tool

1. Start up the Any Unlock Tool software.
2. Click on the Unlock Tab.
3. Select the SECURITY tab.
4. Choose the model Oppo A6 Pro 5G
5. Navigate to the BROM/EDL option.
6. After that, press BROM/EDL ERASE FRP.
7. Use the test point above to connect the phone.

 UFS ISP Pin Labels IF You Need

• CLK
• TXOP
• TXON
• RXOP
• RXON
• GND/ Ground

Required Tools for ISP/UFS Pinout

• Make sure your bench is set up with the right tools before jumping in
• UFI Box/Easy JTAG/Medusa Pro
• 0.1mm – 0.3mm Best jumper wire
• Fine tip soldering iron [Good Quality]
• Need Isopropyl Cleaner (IPA 99%)
• Soldering flux [BEST QUALITY]
• Multimeter (for checking continuity)

How to Connect ISP/UFS to the EMMC Box

• Remove the battery from the phone extremely important to prevent accurate voltage conflicts.
• Clean the PC/MotherBoard area using isopropyl/thinner alcohol.
• Connect jumper wires to CLK, TXON, TXOP, GND, and RXON, RXOP with care using solder.
• Then Connect the wires to your UFS/EMMC tool, following the tool’s pinout.
• After Double check each wire using a multimeter to ensure there are no shorts.
• Connect to UFI or Easy JTAG BOX
• Need In the UFI or Easy Jtag Software
• Select Identify UFS eMMC
• Now Use the Operation you Want, User Partition Special Task Bypass FRP Lock

FOLLOW FACEBOOK PAGE : https://web.facebook.com/gsmsaihaan

Telegram Channel Link : https://t.me/gsmsaihaan

File Password : WWW.GSMSAIHAAN.COM